Reference Sphere Holders (RSH) (8.732)

Inclined in space, can be rotated and fixed: With the Reference Sphere Holder (RSH, for Reference Sphere Holder), consisting of a solid body and the mounting ball, the measuring ball can be positioned at any angle in space. Once the desired position is reached, it can be fixed - for maximum flexibility during calibration.
Stylus with thread, M5, straight
626105-0144-053
Ø Sphere (DK)
1,5 mm
Length (L)
53,0 mm
Ø Shaft (DS)
1,0 mm
Meas. Len.
43,0 mm
Styl. Tip Mat.
Ruby
Shaft Mat.
Tung. Carb
585,00 krSales tax not included
 Delivery time: > 30 days
Stylus with thread, M2, stepped
626102-5144-009
Ø Sphere (DK)
0,2 mm
Length (L)
9,0 mm
Ø Shaft (DS)
1,0 mm
Meas. Len.
3,0 mm
Ø2 Shaft (DSE)
0,15 mm
2. Meas. Len.
3,0 mm
Styl. Tip Mat.
Ruby
Shaft Mat.
Tung. Carb
944,00 krSales tax not included
 Delivery time: > 30 days
Stylus with thread, M3
626123-0255-035
Ø Sphere (DK)
2,0 mm
Length (L)
35,0 mm
Ø Shaft (DS)
1,5 mm
Meas. Len.
29,0 mm
Styl. Tip Mat.
Si-N
Shaft Mat.
Tung. Carb
585,00 krSales tax not included
 Delivery time: > 30 days
Stylus with thread, M5, straight
626105-0825-170
Ø Sphere (DK)
8,0 mm
Length (L)
170,0 mm
Ø Shaft (DS)
6,0 mm
Meas. Len.
157,0 mm
Styl. Tip Mat.
Si-N
Shaft Mat.
Tung. Carb
1.434,00 krSales tax not included
 Delivery time: > 30 days
Stylus with thread, M2, stepped
626102-5645-015
Ø Sphere (DK)
0,8 mm
Length (L)
15,0 mm
Ø Shaft (DS)
1,0 mm
Meas. Len.
9,0 mm
Ø2 Shaft (DSE)
0,6 mm
2. Meas. Len.
4,8 mm
Styl. Tip Mat.
Si-N
Shaft Mat.
Tung. Carb
741,00 krSales tax not included
 Delivery time: > 30 days
Stylus with thread, M3
626123-0254-026
Ø Sphere (DK)
2,0 mm
Length (L)
26,0 mm
Ø Shaft (DS)
1,5 mm
Meas. Len.
20,0 mm
Styl. Tip Mat.
Ruby
Shaft Mat.
Tung. Carb
514,00 krSales tax not included
 Delivery time: > 30 days
Plate extension VAST, index holes, REACH CFX 3+
626107-2150-141
Meas. Len.
181,5 mm
2.796,00 krSales tax not included
 Delivery time: 2 days
Stylus with thread, M3 XXT, straight
626103-0245-041
Ø Sphere (DK)
2,0 mm
Length (L)
41,0 mm
Ø Shaft (DS)
1,0 mm
Meas. Len.
32,0 mm
Styl. Tip Mat.
Si-N
Shaft Mat.
Tung. Carb
681,00 krSales tax not included
 Delivery time: > 30 days
Stylus without thread, stepped
600341-8453-000
Ø Sphere (DK)
0,8 mm
Length (L)
15,8 mm
Ø Shaft (DS)
1,0 mm
Ø2 Shaft (DSE)
0,6 mm
2. Meas. Len.
4,8 mm
Styl. Tip Mat.
Ruby
Shaft Mat.
Tung. Carb
478,00 krSales tax not included
 Delivery time: 2 days
Extension with cone receiver, stepped, REACH CFX 3+
626107-4325-205
Length (L)
325,0 mm
Meas. Len.
205,0 mm
3.811,00 krSales tax not included
 Delivery time: > 30 days
Three material variants

Three material variants

The selection of the calibration sphere holder is primarily based on the measurement environment. They are available in three material variations:
Standard holders made of stainless steel are suitable for air-conditioned measuring rooms; they are available in different lengths, each of which can be found in the article description.
ThermoFit sphere holders are not only stable in length, but also have an unsurpassed flexural strength. They are made of thermally stable carbon fibre tubes and are suitable for use in fluctuating ambient temperatures, e.g. for measurements in production areas. They are only available in a column length of 200 mm.
Measuring sphere holders made of invar steel are available in column lengths of 200 mm, 300 mm or 400 mm. Since they are low-expansion, they are suitable for environments with fluctuating temperature.
All three versions are offered with single holders for one and double holders for two measuring spheres. The spheres are available separately; their selection depends on the purpose of use.